Wearing your first bangle - how hard can it be? If you have any other torque or cuff bracelets, then likely you already know how to wear such bangles. However, even if you are a bangle expert, always remember to follow the correct wearing procedure and avoid opening & closing your bangle for wear. Adjusting the bangle each time it is worn will cause the bangle metal to weaken, resulting in the eventual snap of your bangle. Besides, some bangles are so tough it is impossible to open and close them every single time for wear.

So how do you wear your first bangle? In this guide, we will explain the step by step guide for wearing your first bangle, which is also applicable to the torc bracelets available on our store.

Step 1 - Most bangle enthusiasts will require to do this step only once - adjusting your bangle. For correctly adjusting your bangle, turn your wrist sideways and adjust your bangle opening gap to barely fit the thinnest part of your wrist. Once this step is done, you will likely not have to repeat it - ever!

Step 2 - Threading the bangle. Turn your wrist sideways, and slowly push the bangle opening gap onto the thinnest part of your wrist. For advanced bangle wearers, you can lightly push one of the bangle ends into the soft part on the bottom of your wrist and slide the other end of the bangle over the top - this way you can have a smaller opening gap on your bangle.

Step 3 - Securing and wearing your bangle. Once the bangle is threaded onto your wrist, simply twist the bangle opening towards the bottom of your wrist and go about your day. For the first time wear, you can also slightly mold the bangle for better fit around your wrist, however be careful to avoid accidentally changing the adjustment that you have made in Step 1 to the bangle opening.

Step 4 - Removing your bangle. To remove your bangle, simply twist the bangle opening gap towards the thin side of your wrist and remove the bangle in the same way as you have threaded it in Step 2. Easy!